Journeyman wiremen shall provide themselves with at least the following tools: NOTE Broken or worn tools marked with an * are to be replaced by the Employer

• Tool box
• 2 pr. channel lock pliers
• 1 pr. long nose pliers
• 1 pr. 8" or 9" ? Klein
• 1 pr. diagonal pliers
• 1 Pair tin snips
• 1 wire stripper - #10 wire max.
• Stubby screwdrivers - Straight & Phillips
• 2 Phillips screw drivers (large & small)
• 3 Straight blade screw drivers (assorted sizes)
• 1 Set spin tight wrenches up to ½”
• 1 adjustable wrench-10”
• 1 set Allen wrenches ? through 1/2"
• 1 Set combination wrenches
• 1 – 3/8 Socket set up to 7/8”
• 1 Six foot rule or 12 foot tape
• 1 knife
• 1 claw hammer
• 1 key hole saw (compass)
• 1 wood chisel
• 1 scratch awl
• 1 plumb bob
• 1 combination square
• 1 Amprobe RS?3 or equal tester
• 1 cold chisel
• 1 center punch
• 1 level ? small torpedo
• Current Code Book
• Pencils
• 1 flash light
• *Flashlight Batteries
• 1 hack saw
• *Hack saw blade
• Tap wrench to 1/4"
• *1 Set taps 6/32, 8/32, 10/32, ¼-20
• *1 set drill bits 1/8, 3/16, ¼, 3/8, #35, #29, #21, #7